The Hegardt H72 polyester resin is the most used by professional shapers to build surfboards.
It gets hard by using a MEPK catalyst. It takes about 10 to 20 minutes according to the amount of catalyst used and temperature.
It is recommanded to use between 1 and 1.5% of MEPK catalyst and to not laminate if temperature is below 17°C. Because of its drying time, we recommand this resin to experienced shapers and for small repairs.
The resin is kept in metal bottles (net weight: 1kg).
Warning:
Resin is irritating to eyes, respiratory system and skin. It is also inflammable and should be used with caution:
- Avoid contact with skin
- Use with gloves
- Wear carbon filter mask when using, regularly change filters
- Always work in a ventilated place
Resin preservation:
- take precautionary measures against static discharges
- store in a cool, dry place protected from sunlight
- it can last from 8 to 12 months according to storage precautions
- We recommand to test the resin before using it
Gonçalo R.
Item as described, well packed. (Translated review)
Alejandro G.
Well presented and perfectly hermetically sealed (Translated review)
IÑIGO I.
well (Translated review)
Federico B.
Very good! (Translated review)
Pepe r.
the packaging had dents that cast doubt on its watertightness so that the resin can be kept as long as possible in optimal conditions, and the label was poorly printed. in short, a very poorly maintained product. (Translated review)
Fernando M.
Quality resin and optimal for lamination. (Translated review)
Simone B.
Excellent product, a pity it does not have the dosing cap. (Translated review)
LAURA S.
Corresponds to request (Translated review)
Federico G.
All ok (Translated review)
Rui F.
Boa to repair skimboard (Translated review)
